16395moderate severityPowertrain
Camshaft Position Actuator Circuit/Open Bank 1
on 2013 Volkswagen CC 2.0L Turbo I4 · FWD
What this code means
An open or fault is detected in the camshaft position actuator circuit on Bank 1 (OBD P0011). The variable valve timing solenoid or its wiring is likely at fault.
Symptoms
- Rough idle
- Poor acceleration
- Check engine light on
Common causes
- Faulty camshaft actuator solenoid
- Open or shorted actuator wiring
- Low or dirty engine oil
- Faulty ECM output
Diagnostic steps
- Check engine oil level and condition
- Test actuator solenoid resistance
- Inspect actuator wiring and connector
- Verify ECM control signal
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
00532
Supply Voltage B+ Signal too Low
16394
Camshaft/Crankshaft Position Correlation Bank 1
16486
Mass or Volume Air Flow Circuit Low Input
16487
Mass or Volume Air Flow Circuit High Input
16500
Engine Coolant Temperature Circuit Malfunction
16501
Engine Coolant Temperature Circuit Low Input
16502
Engine Coolant Temperature Circuit High Input
16514
O2 Sensor Circuit Bank 1 Sensor 1
16515
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1
16516
O2 Sensor Circuit High Voltage Bank 1 Sensor 1