Free API
🌍 International coverage, work in progress. This European-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2009–2013 VOLKSWAGEN GOLF

2.0L I4 TDI 170 hp (GTD)•FWD•diesel•CBBB•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Golf →

Control Modules — 2009–2013 Volkswagen Golf

Every control module on the 2010-2014 Volkswagen Golf — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Inside transmission valve body (DSG) or mounted externally on transmission case (automatic)
🔧 VAS 5051/5052/5054A or VCDS
⚠️ DSG mechatronic requires extensive adaptation and clutch learning; fluid change recommended
ABS/ESP Control Module (ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, mounted to ABS hydraulic unit near master cylinder
🔧 VAS 5051/5052/5054A or VCDS
⚠️ Brake bleeding required; coding includes VIN and vehicle configuration
Door Control Module (Door Module)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside door panel, driver and/or passenger doors
🔧 VCDS
⚠️ Optional on higher trims; controls mirror memory and window auto functions
Electric Power Steering Control Module (EPS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, under lower dash trim
🔧 VAS 5051/5052/5054A or VCDS
⚠️ Electric power steering introduced in Mk6; calibration and steering angle sensor learning required
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, top of engine or mounted to firewall near brake booster
🔧 VAS 5051/5052/5054A or VCDS
⚠️ Immobilizer adaptation required; VCDS can code most functions but dealer preferred for immo
Climate Control Module (Climatronic)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Center dash, behind climate control panel
🔧 VCDS
⚠️ Automatic climate only; manual systems have no module
Central Convenience Control Module (Comfort Module)1.0 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Driver side footwell, behind kick panel
🔧 VCDS or Autel
⚠️ Controls windows, locks, lighting; long coding required for feature configuration
Airbag Control Module (ACM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Center console, under center trim between front seats
🔧 VCDS or Autel
⚠️ Crash data clearing required; seat occupancy sensor adaptation may be needed
Fuel Pump Control Module (Fuel Pump Module)0.8 hr R&Rno coding
📍 Under rear seat or in trunk area, near fuel tank
⚠️ Plug-and-play on most models; no coding typically required
Gateway Control Module (Gateway)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Driver side footwell, behind fuse panel
🔧 VCDS
⚠️ CAN bus hub; no security gateway restrictions in this generation
Seat Memory Control Module (Seat Module)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver seat
🔧 VCDS
⚠️ Optional on higher trims; controls seat memory and heating
Park Distance Control Module (PDC)0.7 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear cargo area, left side trim panel
🔧 VCDS
⚠️ Optional equipment; sensor calibration may be needed
Instrument Cluster (Cluster)0.6 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 VAS 5051/5052/5054A
⚠️ Mileage programming requires dealer tool or EEPROM work; immobilizer data must match
Headlight Range Control Module (Headlight Control)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Engine bay, behind headlight assembly or integrated into headlight
🔧 VCDS
⚠️ Adaptive/bi-xenon only; halogen systems have no module
Immobilizer Control Module (Immo)0.6 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Integrated into instrument cluster
🔧 VAS 5051/5052/5054A
⚠️ Key matching requires dealer access or EEPROM programming; all keys must be present
Rear View Camera Module (Camera)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear hatch, integrated into VW emblem or trim
🔧 VCDS
⚠️ Optional equipment; calibration for parking guidelines may be needed
Radio/Navigation Control Module (Radio)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Center dash, DIN slot or integrated touchscreen
🔧 VCDS
⚠️ Anti-theft code may be required; basic adaptation for vehicle features
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →