00003high severityNetwork

Control Module - Defective

on 1997 Volkswagen Jetta 2.0L I4 · FWD

What this code means

The control module has an internal fault and is not working properly. Similar to OBD U0100/P0600 depending on the affected module.

Symptoms

  • Warning lights on dash
  • Module functions not working
  • No communication with scan tool

Common causes

  • Internal module failure
  • Water damage or corrosion
  • Power or ground fault
  • Firmware corruption

Diagnostic steps

  1. Scan all modules for fault codes
  2. Check module power and ground
  3. Inspect connectors for corrosion
  4. Replace module if confirmed faulty

Other Network codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 1997 Volkswagen Jetta repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Volkswagen Jetta — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →