01314critical severityNetwork
Engine Control Module (ECM) - no communications
on 2012 Volkswagen Routan 3.6L V6 · FWD
What this code means
Another module cannot communicate with the ECM over the data bus. This points to a network fault or a dead ECM.
Symptoms
- Engine no start or runs poorly
- Multiple modules report faults
- No data from engine module
Common causes
- Faulty ECM power or ground
- CAN bus wiring fault
- Blown ECM fuse
- Failed ECM
Diagnostic steps
- Check ECM fuses and power supply
- Verify ECM ground connections
- Test CAN bus wiring for shorts or opens
- Scan all modules for communication status
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance