🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.
Back to search

2005 VOLVO C70

2.3L I5 Turbo•FWD•AUTOMATIC•gas•B5234T3•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this C70 →
Every control module on the 2005-2013 Volvo C70 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Central Electronic Module (CEM)2.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Dashboard, driver side behind lower kick panel
🔧 VIDA/DiCE
⚠️ Master control module for body electronics, lighting, immobilizer, and CAN gateway. Replacement requires extensive VIDA configuration, key programming, and module pairing. Critical module.
Brake Control Module (BCM)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, driver side inner fender or ABS pump assembly
🔧 VIDA/DiCE
⚠️ Integrated ABS/DSTC (stability control). Requires bleeding, coding, and system calibration. Some models have separate ABS and DSTC functions.
Transmission Control Module (TCM)2.0 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Transmission, mounted on valve body or nearby bracket
🔧 VIDA/DiCE
⚠️ Automatic transmission only. Requires VIN coding, adaptation, and software download. Transmission fluid service often required during R&R.
Steering Wheel Module (SWM)1.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Steering column, behind steering wheel airbag
🔧 VIDA or aftermarket scanner
⚠️ Controls steering wheel buttons, cruise control, and audio controls. Often self-learns basic functions.
Climate Control Module (CCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard, center stack behind climate control panel
🔧 VIDA or advanced aftermarket scanner
⚠️ Electronic Climate Control (ECC). Some aftermarket tools can perform basic coding. VIDA recommended for full configuration.
Blind Spot Information System Module (BLIS)1.5 hr R&Rdealer / factory tool +0.4 hr▸ programming details
📍 Trunk area, rear quarter panels behind trim
🔧 VIDA/DiCE
⚠️ Optional equipment (2008+). Requires calibration and coding. Sensor alignment critical.
Infotainment Control Module (ICM)1.2 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Dashboard, center stack behind radio/screen
🔧 VIDA/DiCE
⚠️ Later models (2010+) have more integrated systems requiring VIDA. Premium sound systems require amplifier pairing.
Supplemental Restraint System Module (SRS)1.0 hr R&Rdealer / factory tool +0.4 hr▸ programming details
📍 Center console, under front seats or center tunnel
🔧 VIDA/DiCE
⚠️ Requires VIN coding and crash data management. Battery disconnect mandatory. VIDA needed for proper initialization.
Driver Information Module (DIM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, instrument cluster housing behind steering wheel
🔧 VIDA/DiCE
⚠️ Odometer programming mandatory. VIDA required for VIN and mileage configuration. Legal mileage documentation required.
Engine Control Module (ECM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, driver side firewall area or top of engine
🔧 VIDA/DiCE
⚠️ Requires VIDA for VIN coding, immobilizer pairing, and software installation. Aftermarket tools limited to diagnostics only.
Park Assist Module (PAM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk area, driver side or behind rear bumper
🔧 VIDA or aftermarket scanner
⚠️ Optional equipment. Sensor calibration may be required. Some aftermarket tools can perform basic coding.
Telematics Control Module (TCU)1.0 hr R&Rdealer / factory tool +0.4 hr▸ programming details
📍 Trunk area or under rear seat
🔧 VIDA/DiCE
⚠️ Optional Volvo On Call system (2010+). Requires subscription activation and VIN coding. May be integrated with ICM on some models.
Fuel Pump Control Module (FPCM)0.8 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Trunk area, driver side or under rear seat near fuel pump
🔧 Self-learning or VIDA
⚠️ Some models only. Often self-configures. VIDA can perform advanced diagnostics.
Immobilizer Module (IMMO)0.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Integrated with CEM
🔧 VIDA/DiCE
⚠️ Integrated with CEM. Key programming requires VIDA and all keys present. PCC (Personal Car Communicator) on some models adds complexity.
Rain Sensor Module (RSM)0.5 hr R&Rrelearn only +0.1 hr▸ programming details
📍 Windshield, behind rearview mirror
🔧 Self-learning
⚠️ Optional equipment. Usually self-calibrates. Windshield replacement requires sensor transfer or replacement.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →