C0222moderate severityChassis
EPS Control Module Voltage High
on 2000 Volvo S80 2.9L I6 · AWD
What this code means
The EPS module supply voltage exceeds the maximum safe operating threshold.
Symptoms
- EPS warning light
- EPS assist may shut down
- Warning for electrical system
Common causes
- Alternator overcharging
- Voltage regulator failure
- Jump-starting voltage spike
- Aftermarket charger connected while running
Diagnostic steps
- Test charging system voltage (should be 13.5-14.7V)
- Check alternator voltage regulator
- Inspect for aftermarket electrical accessories
- Monitor system voltage under various loads
Repair notes
Repair overcharging alternator. Replace voltage regulator.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent