C0096moderate severityChassis
Brake Lamp Switch Circuit 2 Malfunction
on 2002 Volvo S80 2.9L I6 · AWD
What this code means
The secondary or redundant brake lamp switch input to the ABS/stability module is faulty.
Symptoms
- ABS light on
- Stability control disabled
- Cruise control inoperative
- Brake light inconsistency detected
Common causes
- Secondary brake switch failure
- Wiring fault in redundant circuit
- ABS module input fault
- Switch adjustment incorrect
Diagnostic steps
- Test both brake switch circuits
- Compare primary and secondary switch signals
- Adjust switch if out of specification
- Inspect wiring to ABS module
- Check both switch inputs at module connector
Repair notes
Adjust or replace secondary brake lamp switch.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent