P0600high severityPowertrain
Serial Communication Link
on 2002 Volvo S80 2.9L I6 · AWD
What this code means
Malfunction in the serial data communication link between the PCM and other modules.
Symptoms
- Check Engine Light
- Multiple warning lights
- Communication errors on scan tool
- Some modules not responding
Common causes
- Faulty CAN bus wiring
- PCM failure
- Module failure on bus
- Terminated resistor issue
- Aftermarket device interfering with bus
Diagnostic steps
- Check for aftermarket devices on OBD-II port
- Test CAN bus wiring
- Check bus termination resistors
- Scan all modules for communication
- Inspect wiring for damage
Repair notes
Check for aftermarket devices first. Then check CAN bus wiring. PCM replacement is rare.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1