P1300high severityPowertrain
Ignitor/Ignition Circuit Malfunction
on 2002 Volvo S80 2.9L I6 · AWD
What this code means
The ECM detected a malfunction in the ignition circuit or ignitor module. The ignition system is not firing correctly, which can cause misfires across multiple cylinders.
Symptoms
- Check Engine Light
- Misfires on multiple cylinders
- Rough running
- Loss of power
- Hard starting
Common causes
- Faulty ignition module
- Failed ignition coil(s)
- Wiring fault in ignition circuit
- ECM ignition driver failure
- Corroded ignition connector
Diagnostic steps
- Test ignition coil primary and secondary resistance
- Inspect ignition module connector
- Check ignition circuit wiring
- Test ECM ignition output
- Check for spark at each cylinder
Repair notes
Replace the faulty ignition coil or ignition module.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1