P3013moderate severityPowertrain
Camshaft Profile Actuator A Stuck Bank 2
on 2002 Volvo S80 2.9L I6 · AWD
What this code means
The camshaft profile switching actuator for Bank 2, intake side, is mechanically stuck in one position.
Symptoms
- Check Engine Light
- Uneven power between cylinder banks
- Misfires on one bank at high RPM
- Vibration at certain RPM ranges
- Reduced peak power
Common causes
- Oil passage blockage Bank 2
- Faulty actuator solenoid Bank 2
- Low oil pressure
- Worn actuator pins
- Debris in oil gallery
Diagnostic steps
- Check oil condition
- Command Bank 2 cam profile switch
- Compare Bank 1 vs Bank 2 cam profile timing
- Test oil pressure at Bank 2 actuator feed
- Inspect actuator screen
Repair notes
Replace Bank 2 cam profile actuator solenoid. Clean oil passages.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1