P1618high severityPowertrain
TCM-ECM Communication Fault
on 2005 Volvo S80 2.9L I6 · AWD
What this code means
The ECM detected a communication fault with the Transmission Control Module (TCM). The CAN bus communication between the engine and transmission controllers is disrupted or unreliable.
Symptoms
- Check Engine Light
- Transmission may enter limp mode
- Harsh or incorrect shifting
- Transmission warning light
- Reduced power
Common causes
- CAN bus wiring fault between ECM and TCM
- TCM failure
- ECM CAN driver failure
- Corroded CAN connector
- CAN bus termination resistor fault
Diagnostic steps
- Check CAN bus communication with diagnostic tool
- Test CAN High and CAN Low signals
- Inspect CAN bus wiring between ECM and TCM
- Test CAN termination resistance
- Check TCM power and ground
Repair notes
Repair CAN bus wiring or replace the faulty module (ECM or TCM).
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1