P1300high severityPowertrain

Ignitor/Ignition Circuit Malfunction

on 2013 Volvo S80 3.2L I6 · AWD

What this code means

The ECM detected a malfunction in the ignition circuit or ignitor module. The ignition system is not firing correctly, which can cause misfires across multiple cylinders.

Symptoms

  • Check Engine Light
  • Misfires on multiple cylinders
  • Rough running
  • Loss of power
  • Hard starting

Common causes

  • Faulty ignition module
  • Failed ignition coil(s)
  • Wiring fault in ignition circuit
  • ECM ignition driver failure
  • Corroded ignition connector

Diagnostic steps

  1. Test ignition coil primary and secondary resistance
  2. Inspect ignition module connector
  3. Check ignition circuit wiring
  4. Test ECM ignition output
  5. Check for spark at each cylinder

Repair notes

Replace the faulty ignition coil or ignition module.

Other Powertrain codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2013 Volvo S80 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Volvo S80 — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →