P1618high severityPowertrain

TCM-ECM Communication Fault

on 2013 Volvo S80 3.2L I6 · AWD

What this code means

The ECM detected a communication fault with the Transmission Control Module (TCM). The CAN bus communication between the engine and transmission controllers is disrupted or unreliable.

Symptoms

  • Check Engine Light
  • Transmission may enter limp mode
  • Harsh or incorrect shifting
  • Transmission warning light
  • Reduced power

Common causes

  • CAN bus wiring fault between ECM and TCM
  • TCM failure
  • ECM CAN driver failure
  • Corroded CAN connector
  • CAN bus termination resistor fault

Diagnostic steps

  1. Check CAN bus communication with diagnostic tool
  2. Test CAN High and CAN Low signals
  3. Inspect CAN bus wiring between ECM and TCM
  4. Test CAN termination resistance
  5. Check TCM power and ground

Repair notes

Repair CAN bus wiring or replace the faulty module (ECM or TCM).

Other Powertrain codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2013 Volvo S80 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Volvo S80 — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →