Free API
🌍 International coverage, work in progress. This European-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2010–2014 VOLVO V60

2.0L I5 D3FWDdieselD5204T3turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this V60

Control Modules — 2010–2014 Volvo V60

Every control module on the 2011-2018 Volvo V60 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Climate Control Module (CCM)2.5 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Behind center dashboard, HVAC unit
🔧 VIDA/DiCE or MVCI
⚠️ Configuration download required for dual-zone systems
Transmission Control Module (TCM)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Transmission housing (integrated) or under center console
🔧 VIDA/DiCE or MVCI
⚠️ Adaptive learning reset required; VIN-coding mandatory
Power Steering Control Module (PSCM)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column or rack assembly
🔧 VIDA/DiCE or MVCI
⚠️ Steering angle sensor calibration required after replacement
Brake Control Module (BCM)1.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near ABS pump assembly
🔧 VIDA/DiCE or MVCI
⚠️ Bleeding procedure required; VIN configuration needed
Central Electronic Module (CEM)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind glove box, right side of dashboard
🔧 VIDA/DiCE or MVCI
⚠️ Primary gateway; all keys and modules must be reprogrammed after replacement
Infotainment Control Module (ICM)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center dashboard, behind touchscreen
🔧 VIDA/DiCE or MVCI
⚠️ Software version must match vehicle configuration
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, left side firewall area behind battery
🔧 VIDA/DiCE or MVCI
⚠️ VIN-locked; requires Volvo server download and immobilizer pairing
Four-C Active Chassis Module (4C)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk area, left side panel
🔧 VIDA/DiCE or MVCI
⚠️ Only on models with active suspension; calibration required
Telematics Control Module (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind glove box or under rear seat
🔧 VIDA/DiCE or MVCI
⚠️ Volvo On Call subscription must be reactivated
Supplemental Restraint System Module (SRS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, under front seats area
🔧 VIDA/DiCE or MVCI
⚠️ Crash data must be cleared; all airbag components must be registered
Driver Information Module (DIM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument cluster behind steering wheel
🔧 VIDA/DiCE or MVCI
⚠️ Mileage programming required; VIN-locked
Blind Spot Information System Module (BLIS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear bumper, left and right corners
🔧 VIDA/DiCE or MVCI
⚠️ Alignment and calibration critical after replacement
Headlamp Leveling Module (HLM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Engine bay, near headlight assemblies
🔧 VIDA/DiCE or MVCI
⚠️ Active Bending Lights (ABL) models require calibration
Fuel Pump Control Module (FPCM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Under rear seat or in trunk, near fuel tank
🔧 VIDA/DiCE or MVCI
⚠️ Configuration required for flex-fuel models
Park Assist Module (PAM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Trunk area, right side panel
🔧 VIDA/DiCE or MVCI
⚠️ Sensor calibration may be required
Rain Sensor Module (RSM)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Windshield, behind rearview mirror
🔧 VIDA or Autel
⚠️ Simple configuration; some aftermarket tools can handle
Rear View Camera Module (RVCM)0.5 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Tailgate, integrated with camera
🔧 VIDA/DiCE or MVCI
⚠️ Calibration lines may need adjustment
Immobilizer Module (IMMO)dealer / factory tool +1.0 hr▸ programming details
📍 Integrated in CEM
🔧 VIDA/DiCE or MVCI
⚠️ All keys must be present for programming; part of CEM replacement
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →