🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2022 VOLVO V90

2.0L I4 Turbo+SCAWDAUTOMATICgasB4204T6supercharged
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this V90
Every control module on the 2017-2026 Volvo V90 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Integrated into transmission housing (Aisin 8-speed) or engine bay near ECM
🔧 VIDA with DiCE/MVCI
⚠️ Adaptive learning reset required; transmission may need to be partially disassembled on integrated units
Battery Energy Control Module (BECM)2.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Rear cargo area, under floor (T8 Twin Engine models only)
🔧 VIDA with DiCE/MVCI
⚠️ Only on T8 plug-in hybrid models; high-voltage safety procedures mandatory; battery state-of-health calibration required
Climate Control Module (CCM)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, above center console
🔧 VIDA with DiCE/MVCI
⚠️ Dashboard partial disassembly required; refrigerant recovery not typically needed
Brake Control Module (BCM)1.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near ABS hydraulic unit
🔧 VIDA with DiCE/MVCI
⚠️ Brake bleeding required after replacement; ADAS calibration may be needed if integrated with collision avoidance
Sensus Connect Infotainment Control Module (ICM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind center touchscreen display in dashboard
🔧 VIDA with DiCE/MVCI
⚠️ Software updates frequently required; navigation and user settings must be reconfigured
Central Electronic Module (CEM)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind glove box, right side of dashboard
🔧 VIDA with DiCE/MVCI
⚠️ Primary gateway and security coordinator; replacement requires complete vehicle configuration download and all module re-initialization
Radar Control Module (RCM)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind front bumper, center (forward radar) or behind rear bumper corners (rear radar)
🔧 VIDA with DiCE/MVCI
⚠️ Critical for Pilot Assist and collision avoidance; precise aim calibration required with specialized equipment
Active Chassis Control Module / Four-C Module (ACCM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Rear cargo area, under floor or near rear suspension
🔧 VIDA with DiCE/MVCI
⚠️ Only on vehicles with Four-C active suspension; ride height calibration required
Vision Control Module / Camera Module (VCM)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind windshield, near rearview mirror (forward camera) or integrated into tailgate (rear camera)
🔧 VIDA with DiCE/MVCI
⚠️ ADAS calibration mandatory after replacement; requires alignment targets and specific procedures
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, left side firewall area behind battery
🔧 VIDA with DiCE/MVCI
⚠️ VIN-locked; requires online authentication to Volvo servers for software download and configuration
Steering Wheel Module (SWM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, behind steering wheel
🔧 VIDA with DiCE/MVCI
⚠️ Steering angle sensor calibration required after replacement; airbag removal necessary
Passive Entry Passive Start Module (PEPS)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Center console or behind dashboard center stack
🔧 VIDA with DiCE/MVCI
⚠️ All key fobs must be re-programmed; immobilizer synchronization with ECM and CEM required
Supplemental Restraint System Module (SRS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, beneath center armrest or under front seats
🔧 VIDA with DiCE/MVCI
⚠️ Battery disconnect required; crash data retrieval should be performed before replacement
Active High Beam Control Module (AHB)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Integrated into headlight assemblies or behind front bumper
🔧 VIDA with DiCE/MVCI
⚠️ Headlight aim calibration required after replacement; camera-based system on some models
Power Tailgate Module (PTM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Inside tailgate, left or right side panel
🔧 VIDA with DiCE/MVCI
⚠️ Height adjustment and pinch protection calibration required
Audio Amplifier Module (AAM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Under front passenger seat or in rear cargo area (Bowers & Wilkins system)
🔧 VIDA with DiCE/MVCI
⚠️ Premium audio system only; speaker configuration coding required
Park Assist Module (PAM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind rear bumper, center or left side
🔧 VIDA with DiCE/MVCI
⚠️ Sensor calibration required; integrated with camera and radar systems on Pilot Assist models
Telematics Control Module (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind glove box or under rear cargo floor
🔧 VIDA with DiCE/MVCI
⚠️ Volvo On Call subscription re-activation required; SIM card may need transfer
Driver Information Module (DIM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument cluster housing, behind steering wheel
🔧 VIDA with DiCE/MVCI
⚠️ Mileage programming from CEM required; VIN-locked
Door Control Module (DCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door, behind door panel (typically 4 modules)
🔧 Autel MaxiSys or VIDA
⚠️ Window auto-up/down relearn typically required; some functions accessible via aftermarket tools
Fuel Pump Control Module (FPCM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Under rear cargo floor, near fuel tank
🔧 VIDA with DiCE/MVCI
⚠️ Fuel system depressurization required before service
Trailer Module (TRM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Rear cargo area, left side panel near hitch
🔧 VIDA with DiCE/MVCI
⚠️ Only present on vehicles with factory tow package
Seat Control Module (SCM)0.6 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under front seats, driver and passenger side
🔧 Autel MaxiSys or VIDA
⚠️ Seat position memory reset required; some aftermarket tools can perform basic coding
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →