Every control module on the 2019-2026 Volvo XC40 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Battery Energy Control Module (BECM) 2.5 hr R&R dealer / factory tool +1.5 hr ▸ programming details
📍 Under rear cargo floor, integrated with high-voltage battery pack
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Plug-in hybrid (Recharge) models only; high-voltage safety procedures mandatory; battery state-of-health programming required
Transmission Control Module (TCM) 2.5 hr R&R dealer / factory tool +1.0 hr ▸ programming details
📍 Integrated with transmission assembly, left side of engine bay
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Often integrated with valve body; transmission removal may be required; adaptive values must be reset
Climate Control Module (CCM) 2.0 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Behind center dashboard, integrated with HVAC unit
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Dashboard removal required for access; configuration includes market-specific settings
Brake Control Module (BCM) 1.8 hr R&R dealer / factory tool +0.8 hr ▸ programming details
📍 Engine bay, left side near ABS pump assembly
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Integrated with ABS/ESC hydraulic unit; brake bleeding required after replacement; ADAS calibration may be needed
Central Electronic Module (CEM) 1.5 hr R&R dealer / factory tool +1.5 hr ▸ programming details
📍 Behind glove box, right side of dashboard
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Primary security gateway; controls immobilizer and network access; replacement requires complete vehicle configuration download
Vision Control Module (VCM) 1.5 hr R&R dealer / factory tool +1.0 hr ▸ programming details
📍 Behind rearview mirror or integrated with windshield camera housing
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Forward-facing camera for ADAS; windshield replacement requires recalibration; critical for City Safety and Pilot Assist
Head-Up Display Module (HUD) 1.5 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Dashboard, above instrument cluster
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Optional equipment; alignment and brightness calibration required; not available on all trim levels
Sensus Connect Infotainment Control Module (ICM) 1.5 hr R&R dealer / factory tool +0.8 hr ▸ programming details
📍 Behind center touchscreen display, center dashboard
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Android-based system; software updates via OTA or VIDA; navigation and account data may require separate activation
Radar Control Module (RCM) 1.2 hr R&R dealer / factory tool +1.0 hr ▸ programming details
📍 Behind front grille, center lower bumper area
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Adaptive cruise control and collision avoidance; static and dynamic calibration required after replacement or front-end collision
Engine Control Module (ECM) 1.2 hr R&R dealer / factory tool +1.0 hr ▸ programming details
📍 Engine bay, left side firewall area behind battery
🔧 Volvo VIDA + MVCI/DiCE
⚠️ VIN-locked; requires online authentication to Volvo servers for software download and configuration
Steering Wheel Module (SWM) 1.2 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Steering column, behind steering wheel
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Contains steering angle sensor; calibration required after replacement; may include EPS control on some variants
Passive Entry Passive Start Module (PEPS) 1.2 hr R&R dealer / factory tool +1.0 hr ▸ programming details
📍 Behind center console or integrated with CEM
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Key fob programming mandatory; security-linked to CEM; all keys must be present for programming
Active Chassis Control Module (ACCM) 1.2 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Under vehicle, near rear suspension or in trunk area
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Four-C active suspension only; not on base models; ride height and damping calibration required
Supplemental Restraint System Module (SRS) 1.0 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Center console area, beneath center stack or under front seats
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Battery disconnect required; crash data must be cleared; VIN coding mandatory
Telematics Control Module (TCU) 1.0 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Behind glove box or under rear cargo floor (varies by model year)
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Handles Volvo On Call services; SIM card and subscription activation required; may need cellular carrier provisioning
Active High Beam Control Module (AHB) 1.0 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Integrated with headlight assemblies or behind front bumper
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Camera-based system; calibration required after replacement; may be integrated with VCM on some variants
Power Tailgate Module (PTM) 1.0 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Inside tailgate, left or right side panel
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Power liftgate only; calibration required for open/close limits; kick sensor integration if equipped
Driver Information Module (DIM) 0.8 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Instrument cluster housing, behind steering wheel
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Mileage programming required; VIN-locked; stores vehicle configuration data
Door Control Module (DCM) 0.8 hr R&R aftermarket tool +0.3 hr ▸ programming details
📍 Inside each door panel (4 modules total)
🔧 Autel MaxiSys or VIDA
⚠️ Controls windows, locks, mirrors; window auto-up/down relearn usually possible with aftermarket tools
Fuel Pump Control Module (FPCM) 0.8 hr R&R aftermarket tool +0.3 hr ▸ programming details
📍 Under rear cargo floor, near fuel tank
🔧 Autel MaxiSys or VIDA
⚠️ Simple module; most aftermarket tools can perform relearn; VIDA preferred but not always mandatory
Park Assist Module (PAM) 0.8 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Behind rear bumper or in trunk area
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Ultrasonic sensors; calibration required; may be integrated with VCM on vehicles with 360-degree camera
Trailer Module (TRM) 0.7 hr R&R dealer / factory tool +0.3 hr ▸ programming details
📍 Rear cargo area, left side panel near hitch
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Factory tow package only; not present on all vehicles; controls trailer lighting and brake integration
Seat Control Module (SCM) 0.6 hr R&R aftermarket tool +0.2 hr ▸ programming details
📍 Under front seats (driver and passenger)
🔧 Autel MaxiSys or VIDA
⚠️ Memory seat settings; most aftermarket tools can code; multiple modules if both seats are powered
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour?
Tell us — corrections ship fast here.