🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.
Back to search

2026 VOLVO XC40

2.0L I4 Turbo•AWD•AUTOMATIC•gas•B4204T27•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this XC40 →
Every control module on the 2019-2026 Volvo XC40 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Battery Energy Control Module (BECM)2.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Under rear cargo floor, integrated with high-voltage battery pack
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Plug-in hybrid (Recharge) models only; high-voltage safety procedures mandatory; battery state-of-health programming required
Transmission Control Module (TCM)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Integrated with transmission assembly, left side of engine bay
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Often integrated with valve body; transmission removal may be required; adaptive values must be reset
Climate Control Module (CCM)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, integrated with HVAC unit
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Dashboard removal required for access; configuration includes market-specific settings
Brake Control Module (BCM)1.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near ABS pump assembly
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Integrated with ABS/ESC hydraulic unit; brake bleeding required after replacement; ADAS calibration may be needed
Central Electronic Module (CEM)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind glove box, right side of dashboard
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Primary security gateway; controls immobilizer and network access; replacement requires complete vehicle configuration download
Vision Control Module (VCM)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind rearview mirror or integrated with windshield camera housing
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Forward-facing camera for ADAS; windshield replacement requires recalibration; critical for City Safety and Pilot Assist
Head-Up Display Module (HUD)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, above instrument cluster
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Optional equipment; alignment and brightness calibration required; not available on all trim levels
Sensus Connect Infotainment Control Module (ICM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind center touchscreen display, center dashboard
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Android-based system; software updates via OTA or VIDA; navigation and account data may require separate activation
Radar Control Module (RCM)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind front grille, center lower bumper area
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Adaptive cruise control and collision avoidance; static and dynamic calibration required after replacement or front-end collision
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, left side firewall area behind battery
🔧 Volvo VIDA + MVCI/DiCE
⚠️ VIN-locked; requires online authentication to Volvo servers for software download and configuration
Steering Wheel Module (SWM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, behind steering wheel
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Contains steering angle sensor; calibration required after replacement; may include EPS control on some variants
Passive Entry Passive Start Module (PEPS)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind center console or integrated with CEM
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Key fob programming mandatory; security-linked to CEM; all keys must be present for programming
Active Chassis Control Module (ACCM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Under vehicle, near rear suspension or in trunk area
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Four-C active suspension only; not on base models; ride height and damping calibration required
Supplemental Restraint System Module (SRS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console area, beneath center stack or under front seats
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Battery disconnect required; crash data must be cleared; VIN coding mandatory
Telematics Control Module (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind glove box or under rear cargo floor (varies by model year)
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Handles Volvo On Call services; SIM card and subscription activation required; may need cellular carrier provisioning
Active High Beam Control Module (AHB)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Integrated with headlight assemblies or behind front bumper
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Camera-based system; calibration required after replacement; may be integrated with VCM on some variants
Power Tailgate Module (PTM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Inside tailgate, left or right side panel
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Power liftgate only; calibration required for open/close limits; kick sensor integration if equipped
Driver Information Module (DIM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument cluster housing, behind steering wheel
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Mileage programming required; VIN-locked; stores vehicle configuration data
Door Control Module (DCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door panel (4 modules total)
🔧 Autel MaxiSys or VIDA
⚠️ Controls windows, locks, mirrors; window auto-up/down relearn usually possible with aftermarket tools
Fuel Pump Control Module (FPCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under rear cargo floor, near fuel tank
🔧 Autel MaxiSys or VIDA
⚠️ Simple module; most aftermarket tools can perform relearn; VIDA preferred but not always mandatory
Park Assist Module (PAM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind rear bumper or in trunk area
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Ultrasonic sensors; calibration required; may be integrated with VCM on vehicles with 360-degree camera
Trailer Module (TRM)0.7 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Rear cargo area, left side panel near hitch
🔧 Volvo VIDA + MVCI/DiCE
⚠️ Factory tow package only; not present on all vehicles; controls trailer lighting and brake integration
Seat Control Module (SCM)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under front seats (driver and passenger)
🔧 Autel MaxiSys or VIDA
⚠️ Memory seat settings; most aftermarket tools can code; multiple modules if both seats are powered
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →