The 2013 XC60 is a solid premium crossover, but the T6 3.0L turbo I6 engine has catastrophic piston/connecting rod failures that can grenade the motor, while all variants share Volvo's transmission mount and oil cooler weaknesses that plague this era.
Symptoms: sudden loud knocking from engine bay, metal shavings in oil, complete loss of power, check engine light with misfire codes, oil pressure warning
Fix: The T6 3.0L turbo six has a known defect where piston skirts crack and connecting rods fail, sending metal through the block. Requires complete engine replacement or rebuild with upgraded pistons. 20-30 hours labor for R&R plus machine work.
Estimated cost: $8,000-15,000
Transmission Oil Cooler Line Failure
Common · high severity
Typical onset: 70,000-110,000 mi
Symptoms: transmission fluid leaking at radiator area, pink fluid under vehicle, transmission overheating warnings, harsh shifting when hot
Fix: Plastic transmission cooler lines crack where they connect to the radiator, dumping ATF. If caught early, just replace lines and top off fluid (2-3 hours). If driven low on fluid, transmission damage follows and you're looking at rebuild/replacement.
Estimated cost: $400-800 for lines; $3,500-6,000 if transmission damaged
Transmission Mount Collapse
Common · medium severity
Typical onset: 60,000-100,000 mi
Symptoms: clunk when shifting from park to drive, vibration at idle in gear, jerky acceleration from stop, visible engine movement when revving
Fix: The hydraulic transmission mount fails, causing excessive drivetrain movement. Replacement requires lifting engine slightly. 2-3 hours labor. Use OEM or Lemforder parts—aftermarket rubber mounts fail quickly.
Estimated cost: $400-700
Angle Gear Leaks (AWD Models)
Occasional · medium severity
Typical onset: 80,000-130,000 mi
Symptoms: oil dripping from rear of transmission, whining noise from rear differential area, vibration during acceleration
Fix: The angle gear (transfer case) seals leak, contaminating fluid and eventually damaging bearings. Requires transmission removal to properly reseal. 6-8 hours labor. Catch it early before bearing damage occurs.
Estimated cost: $1,200-2,000 for seals; $2,500-4,000 if bearings damaged
Timing Belt and Water Pump Service
Common · high severity
Symptoms: service interval at 105,000 mi or 10 years, preventive maintenance—no symptoms until catastrophic failure
Fix: Interference engine means skipped timing belt destroys valves and pistons. Must replace belt, tensioner, idlers, and water pump together. Front-mounted engine makes access reasonable. 6-8 hours labor. Non-negotiable maintenance.
Estimated cost: $1,500-2,200
PCV System Oil Trap Clogging
Common · medium severity
Typical onset: 70,000-120,000 mi
Symptoms: whistling or hissing from engine, rough idle, excessive oil consumption, oil in intake tract, check engine light with lean codes
Fix: Oil separator/trap in PCV system clogs with sludge, causing vacuum leaks and oil sucking into intake. Requires removing intake manifold to access trap assembly. 3-4 hours labor. Clean or replace trap and all PCV hoses.
Estimated cost: $600-1,000
Fuel Filter Clogging (High-Pressure Pump)
Occasional · medium severity
Typical onset: 80,000-140,000 mi
Symptoms: hard starting when engine hot, loss of power under load, misfires at highway speed, check engine light with fuel pressure codes
Fix: In-tank high-pressure fuel filter clogs, starving the direct injection system. Requires dropping fuel tank. Often overlooked maintenance item. 3-4 hours labor. Replace both low and high-pressure filters while tank is down.
Estimated cost: $500-800
Owner tips
If buying a T6 model, demand oil analysis history and borescope inspection—many engines are ticking time bombs
Replace transmission oil cooler lines proactively at 70k miles; the $600 preventive beats a $5k transmission
Service PCV oil trap every 60k miles to prevent carbon buildup and oil consumption
Keep excellent records of timing belt service—walk away if no proof it's been done on schedule
Budget $1,500/year for deferred maintenance on any used example—these need Volvo-specific attention
Buy the naturally-aspirated 3.2L if you want reliability; the T6 is a gamble that can cost you an engine, but overall the platform is decent if maintenance history is verifiable.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
Fitment notes: AGM battery required for engine start-stop system; located in engine compartment
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Every control module on the 2010-2017 Volvo XC60 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
📍 Integrated in CEM or separate module near ignition
🔧 VIDA/DiCE or MVCI
⚠️ Key programming and pairing to ECM/CEM required; all keys must be present
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
Volvo Cars of N.A., LLC (Volvo) is recalling certain 2008-2016 V70 and XC70, 2007-2016 S80, 2011-2018 S60 and V60, 2016-2018 S60 Cross Country, 2014-2020 S60L, 2009-2015 S80L, 2009-2016 XC60 and 2015-2018 V60 Cross Country vehicles. The flexible steel cable that connects the seat belt to the front outboard seating positions may fatigue over time, causing the seat belt to not secure the occupant in the event of a crash.
Consequence: An unsecured occupant has an increased risk of injury in the event of a crash.
Remedy: Volvo will notify owners, and dealers will replace the seat belt anchor cable for both front seats. The recall began December 10, 2020. Owners may contact Volvo customer service at 1-800-458-1552. Volvo's number for this recall is R10029.
EQUIPMENT:OTHER:LABELS · 13V084000
2013-03-05
Volvo is recalling certain model year 2013 S60 and XC60 vehicles, manufactured on January 7, 2013. The product identification labels were printed with the incorrect manufacture year. Thus, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification Regulation."
Consequence: With an incorrect date of manufacture on the certification label, the vehicle owner may not be to determine if they are affected by future vehicle recalls, increasing their risk of a crash of injury.
Remedy: Volvo has quarantined the affected vehicles and will install correct labels prior to sale. The recall began during March 2013. Owner notification letters will not be sent.
AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE · 12V439000
2012-09-10
Volvo is recalling certain model year 2013 S60 and XC60 vehicles. A manufacturing defect within the Supplemental Restraint System (SRS) control unit may lead to an inadvertent deployment of the seat belt pretensioner and/or inflatable curtain.
Consequence: If the seat belt pretensioner and/or inflatable side curtain deploy without cause, the driver could be distracted and the driver's visibility could be reduced, increasing the risk of a crash.
Remedy: These vehicles have not been sold and the SRS control unit will be replaced prior to the cars being sold. Owners may contact Volvo at 1-800-458-1552.
Size-standard part numbers — verify your connector type before buying. Rear blades are model-specific; check the package's vehicle list.
Fuel economy figures are EPA data via fueleconomy.gov (median across matching trims). Performance figures are compiled estimates for the 2013 Volvo XC60 3.0L I6 Turbo and can vary by trim.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years.