Free API
2.0L Turbo Supercharged I4•AWD•AUTOMATIC•gas•B4204T6•turbo
1 active safety recall on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0182moderate severityPowertrain

Fuel Temperature Sensor A Circuit Low

on 2015 Volvo XC60 2.0L Turbo Supercharged I4 · AWD

What this code means

The PCM detects a low voltage signal from fuel temperature sensor A. This sensor is used to adjust fueling based on fuel temperature.

Symptoms

  • Check engine light on
  • Hard starting
  • Poor drivability

Common causes

  • Faulty fuel temperature sensor
  • Short to ground in wiring
  • Corroded connector
  • Faulty PCM

Diagnostic steps

  1. Scan for stored codes and freeze frame
  2. Check fuel temp sensor signal voltage
  3. Inspect wiring for shorts to ground
  4. Replace fuel temperature sensor if faulty

Other Powertrain codes on this vehicle

For shop owners
Diagnosing for customers?
Text them the estimate with photos and get approval in minutes with Auto Shop Base.
Talk to the ownerSee what's included
Built by a shop owner. Talk to Chris, not a sales rep.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2015 Volvo XC60 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Volvo XC60 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →