Free API
3.2L I6AWDAUTOMATICgasB6324S
1 active safety recall on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0913high severityPowertrain

Gate Select Position Circuit High

on 2015 Volvo XC60 3.2L I6 · AWD

What this code means

The gate select position circuit voltage is reading higher than expected. This often indicates an open circuit or short to voltage in the shift gate sensor system.

Symptoms

  • Shifting problems
  • Transmission warning light
  • Gear engagement failure

Common causes

  • Open circuit in wiring
  • Short to power supply
  • Faulty gate select position sensor
  • Failed transmission control module

Diagnostic steps

  1. Scan for stored codes
  2. Inspect wiring for opens or short to voltage
  3. Measure sensor reference and signal voltage
  4. Test or replace gate select sensor

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2015 Volvo XC60 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Volvo XC60 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →