🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2026 VOLVO XC90 RECHARGE

2.0L Turbo I4 HybridAWDAUTOMATIChybridturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this XC90 Recharge
Every control module on the 2023-2026 Volvo XC90 Recharge — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Battery Energy Control Module (BECM)2.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Center tunnel, beneath rear seats near high-voltage battery
🔧 VIDA with DiCE/MVCI
⚠️ Manages 11.6 kWh (2023) or 14.9 kWh (2024+) lithium-ion battery pack; high-voltage safety procedures mandatory; battery cell balancing and SOC calibration required
Lidar Control Module (LCM)2.5 hr R&Rdealer / factory tool +2.0 hr▸ programming details
📍 Roof-mounted, above windshield (2024+ models with Pilot Assist Pro)
🔧 VIDA with DiCE/MVCI
⚠️ Optional Luminar lidar sensor for enhanced ADAS; requires roof removal for access; extensive calibration required; only available on select 2024+ trim levels
Transmission Control Module (TCM)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Integrated with transmission assembly, left side of engine bay
🔧 VIDA with DiCE/MVCI
⚠️ 8-speed Aisin AWF8 transmission; requires transmission removal for access; adaptive learning reset required
Climate Control Module (CCM)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, above center console
🔧 VIDA with DiCE/MVCI
⚠️ Four-zone climate system; dashboard removal required for access
Brake Control Module (BCM)1.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near ABS hydraulic unit
🔧 VIDA with DiCE/MVCI
⚠️ Integrated with ABS/ESC; brake bleed and system calibration required after replacement
Central Electronic Module (CEM)1.5 hr R&Rdealer / factory tool +2.0 hr▸ programming details
📍 Behind glove box, right side of dashboard
🔧 VIDA with DiCE/MVCI
⚠️ Primary gateway and security coordinator; replacement requires complete vehicle configuration download and all module re-initialization; enhanced security protocols on 2023+ models
Google Built-In Infotainment Control Module (ICM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind center touchscreen display
🔧 VIDA with DiCE/MVCI
⚠️ 9-inch portrait touchscreen with Google Automotive Services; Android-based system with OTA updates; Google account integration required for full functionality
Active Chassis Control Module / Four-C Module (ACCM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Under vehicle, near rear axle area
🔧 VIDA with DiCE/MVCI
⚠️ Optional air suspension system; ride height calibration and sensor learning required
Power Tailgate Module (PTM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Inside tailgate, left side trim panel
🔧 VIDA with DiCE/MVCI
⚠️ Hands-free power tailgate; kick sensor calibration required
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, left side firewall area behind battery
🔧 VIDA with DiCE/MVCI
⚠️ Hybrid powertrain requires both ICE ECM and BECM coordination; VIN-locked programming mandatory; 2023+ facelift includes updated software architecture
Passive Entry Passive Start Module (PEPS)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Center console area, integrated with CEM communication
🔧 VIDA with DiCE/MVCI
⚠️ Key fob programming and immobilizer pairing mandatory; all keys must be present for programming; digital key support on 2024+ models
Radar Control Module (RCM)1.2 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind front grille, center lower area
🔧 VIDA with DiCE/MVCI
⚠️ Adaptive cruise control and collision avoidance; radar calibration with alignment targets required; updated radar technology on 2023+ models
Vision Control Module / Camera Module (VCM)1.0 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind rearview mirror, windshield mounted
🔧 VIDA with DiCE/MVCI
⚠️ Forward-facing camera for ADAS; windshield calibration and static/dynamic ADAS calibration mandatory after replacement; higher resolution camera on 2023+ models
Door Control Module (DCM)1.0 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Inside each door (four modules total)
🔧 VIDA with DiCE/MVCI
⚠️ Controls windows, locks, mirrors, puddle lights; window auto-up/down relearn required
Steering Wheel Module (SWM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, behind steering wheel
🔧 VIDA with DiCE/MVCI
⚠️ Contains steering angle sensor and driver controls; steering angle calibration required
Park Assist Module (PAM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind rear bumper, center area
🔧 VIDA with DiCE/MVCI
⚠️ Ultrasonic parking sensors; sensor calibration required; enhanced park assist on 2023+ models
Telematics Control Module (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind glove box area, near CEM
🔧 VIDA with DiCE/MVCI
⚠️ Volvo On Call connectivity; SIM card and subscription activation required; 5G capability on 2024+ models
Supplemental Restraint System Module (SRS)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, beneath front seats
🔧 VIDA with DiCE/MVCI
⚠️ Crash data must be cleared; VIN programming required
Driver Information Module (DIM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument cluster, behind steering wheel
🔧 VIDA with DiCE/MVCI
⚠️ Digital instrument cluster; mileage programming from CEM required; 2023+ facelift includes updated graphics
Fuel Pump Control Module (FPCM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Under vehicle, near fuel tank
🔧 VIDA with DiCE/MVCI
⚠️ Controls fuel pump operation; basic configuration required
Active High Beam Control Module (AHB)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind rearview mirror, integrated with camera module
🔧 VIDA with DiCE/MVCI
⚠️ Thor's Hammer LED headlights; camera calibration required after replacement; pixel LED technology on 2023+ models
Trailer Module (TRM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Rear cargo area, left side behind trim panel
🔧 VIDA with DiCE/MVCI
⚠️ Optional equipment; manages trailer lighting and brake controller
Seat Control Module (SCM)0.6 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under front seats (driver and passenger each have separate modules)
🔧 Autel MaxiSys or VIDA
⚠️ Controls power seat, heating, ventilation, massage; basic aftermarket tools can code
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →