ShopBaseComplete shop management for auto repair shops · $249/mo
Try ShopBase →
HomeWaveforms1972 Dodge ChallengerO2 Sensor - Bank 1 Upstream

O2 Sensor - Bank 1 Upstream

1972 Dodge Challenger · 440ci V8 Six Pack

0V0.0V0VN/A | N/Anot-applicable
Sensor Type
not-applicable
Waveform Type
not-applicable
Location
Not equipped - 1972 Dodge Challenger predates emission control oxygen sensors (introduced mid-1970s for California, federally in 1980-1981)
Pins
Unknown
0
Timebase
N/A
Voltage Scale
N/A
Trigger
N/A

Wiring

N/A - No oxygen sensor system

Expected Voltage Range

At Idle
0V to 0V
At Higher RPM
0V to 0V

Expected Pattern

Not applicable - open-loop carburetor fuel system

Known-Good Waveform

The 1972 model year used basic emission controls (PCV, evaporative canister) but no closed-loop fuel control or oxygen sensors. Fuel mixture is adjusted mechanically via carburetor jets and mixture screws.

Common Failure Patterns

N/A
Cause: Sensor not present on this vehicle

Diagnostic Tips

Use exhaust gas analyzer (HC, CO, CO2, O2 readings) for mixture diagnosis. Adjust mixture screws for 14.7:1 stoichiometric ratio or slightly rich for performance applications.

Related Diagnostic Trouble Codes

P0130P0131P0132P0133P0134
Always confirm waveform data with your vehicle's OEM service manual before diagnosing.

Free, no signup. View all waveforms for this vehicle