C0091
ChassisBrake Systemhigh severityBrake Booster Performance
What C0091 Means
The brake booster is not providing adequate assist, detected by pressure sensor or pedal effort monitoring.
Symptoms
- Hard brake pedal
- Increased stopping distance
- Brake warning light on
- Engine may stall when brakes applied firmly
Common Causes
- Leaking brake booster diaphragm
- Cracked or disconnected vacuum hose
- Check valve failure
- Brake booster control valve stuck
- Low engine vacuum on turbocharged vehicles
Diagnostic Steps
- Perform brake booster leak-down test
- Check vacuum hose and check valve
- Test engine vacuum at idle
- Apply brakes with engine off then start engine (pedal should drop)
- Check booster operating rod adjustment
Where to start: Replace brake booster if diaphragm is leaking. Replace vacuum hose or check valve as needed.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Related Codes
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for C0091?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix