C0100
ChassisBrake Systemmoderate severityBrake Pedal Position Sensor Circuit
What C0100 Means
General malfunction in the brake pedal position sensor, which provides analog brake apply data to the ABS/stability module.
Symptoms
- ABS warning light
- Stability control disabled
- Regenerative braking fault on hybrids
- Brake assist may not activate
Common Causes
- Faulty brake pedal position sensor
- Sensor wiring damage
- Connector corrosion at sensor
- ABS module input failure
Diagnostic Steps
- Read brake pedal position with scan tool while pressing pedal
- Check for smooth, proportional signal
- Inspect sensor wiring and connector
- Test sensor supply voltage
- Check for related brake switch codes
Where to start: Replace brake pedal position sensor. Verify smooth signal across full pedal travel.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Related Codes
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for C0100?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix