P0184
PowertrainTemperature Sensorlow severityFuel Temperature Sensor A Circuit Intermittent
What P0184 Means
The fuel temperature sensor signal is cutting in and out intermittently. This is usually caused by a loose or corroded connection rather than a failed sensor.
Symptoms
- Check engine light on
- Erratic fuel trim
- Occasional rough running
Common Causes
- Loose or corroded connector
- Damaged sensor wiring
- Failing fuel temperature sensor
- Faulty PCM
Diagnostic Steps
- Scan for stored and pending codes
- Inspect sensor connector and wiring
- Wiggle-test harness while monitoring signal
- Replace sensor if signal drops out
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0184?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix