P0228
PowertrainThrottle Positionhigh severityThrottle/Pedal Position Sensor/Switch C Circuit High
What P0228 Means
The C throttle or pedal position sensor is reporting an abnormally high voltage. This usually points to an open circuit or a failed sensor.
Symptoms
- Check engine light on
- Reduced power mode
- Erratic throttle response
Common Causes
- Open circuit in wiring
- Failed sensor C
- Corroded connector
- Faulty PCM
Diagnostic Steps
- Retrieve trouble codes
- Measure signal voltage at sensor
- Check wiring for open circuit
- Replace sensor if faulty
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0228?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix