P2109
PowertrainThrottle Positionhigh severityThrottle/Pedal Position Sensor A Minimum Stop Performance
What P2109 Means
The throttle position sensor is not reading the expected minimum (closed) stop value. This indicates a mechanical or electrical issue with the throttle body sensor A range.
Symptoms
- Check engine light on
- Erratic or high idle
- Reduced power / limp mode
Common Causes
- Dirty or carbon-fouled throttle body
- Faulty throttle position sensor A
- Wiring or connector fault
- Mechanical throttle blade binding
Diagnostic Steps
- Scan code and view TPS live data
- Clean throttle body and recheck
- Inspect TPS wiring and connectors
- Perform throttle relearn or replace sensor
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P2109?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix