P2116
PowertrainThrottle Pedalhigh severityPedal Position Sensor/Switch E Minimum Stop Performance
What P2116 Means
The accelerator pedal position sensor E is not reading its expected minimum stop value. This points to a fault in the pedal sensor or its signal circuit.
Symptoms
- Check engine light on
- Poor throttle response
- Limp mode or reduced power
Common Causes
- Faulty accelerator pedal position sensor
- Wiring or connector corrosion
- Debris under pedal assembly
- Failed PCM reference to pedal sensor
Diagnostic Steps
- Scan and view pedal position live data
- Inspect pedal sensor wiring and connector
- Check for obstructions at pedal
- Replace pedal position sensor if out of range
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P2116?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix