P2130
PowertrainThrottle Pedalhigh severityThrottle/Pedal Position Sensor/Switch F Circuit
What P2130 Means
A fault has been detected in the throttle or pedal position sensor F circuit. This typically indicates an electrical problem in the sensor signal path.
Symptoms
- Check engine light on
- Erratic throttle response
- Limp mode engaged
Common Causes
- Faulty pedal/throttle position sensor F
- Open or shorted signal wiring
- Corroded connector
- PCM reference voltage fault
Diagnostic Steps
- Scan and read sensor F circuit data
- Inspect wiring and connector for damage
- Measure sensor reference and signal voltage
- Replace sensor if readings are out of spec
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P2130?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix