C0072
ChassisStability Controlmoderate severityYaw Rate Sensor Bias/Offset
What C0072 Means
The yaw rate sensor zero-point offset has drifted beyond acceptable limits.
Symptoms
- Stability control light on
- ESC activates unnecessarily
- Vehicle pulls to one side during ESC event
- ESC disabled warning
Common Causes
- Sensor internal calibration drift
- Sensor mounting misaligned
- Aftermarket suspension modification affecting sensor plane
- Temperature-related sensor drift
Diagnostic Steps
- Check yaw rate sensor output at standstill (should read zero)
- Perform yaw rate sensor calibration
- Verify sensor is mounted level and secure
- Check for aftermarket suspension modifications
- Inspect for related lateral acceleration sensor codes
Where to start: Recalibrate yaw rate sensor. If bias returns, replace sensor assembly.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Related Codes
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for C0072?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix