C0087
ChassisBrake Systemmoderate severityMaster Cylinder Pressure Sensor Circuit High
What C0087 Means
High voltage from the master cylinder brake pressure sensor circuit.
Symptoms
- ABS light on
- Brake system warning
- Stability control fault
- False high-pressure reading
Common Causes
- Signal wire open or shorted to voltage
- Faulty pressure sensor
- Connector corrosion
- Reference voltage issue
Diagnostic Steps
- Test sensor signal voltage with brake released and applied
- Check for open circuits in signal wire
- Inspect connector for corrosion
- Verify reference voltage at sensor
Where to start: Repair wiring or replace brake pressure sensor.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Related Codes
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for C0087?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix