P0102
PowertrainFuel Air Meteringmoderate severityMass Air Flow (MAF) Circuit Low Input
What P0102 Means
The MAF sensor signal voltage is lower than the minimum expected value.
Symptoms
- Check Engine Light
- Loss of power
- Rich fuel condition
- Black smoke
Common Causes
- Faulty MAF sensor
- Short in signal wire
- Disconnected sensor
- Contaminated sensor element
Diagnostic Steps
- Check MAF sensor connector
- Test signal voltage
- Inspect wiring for shorts to ground
- Test sensor output
Where to start: Replace MAF sensor or repair wiring.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Related Codes
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0102?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix