P0368
PowertrainCrankshaft Camshaft Positionmoderate severityCamshaft Position Sensor B Circuit High (Bank 1)
What P0368 Means
The PCM detected an abnormally high voltage signal from the bank 1 camshaft position sensor B circuit. This can affect timing calculations and engine performance.
Symptoms
- Check engine light on
- Rough running or stalling
- Hard starting
Common Causes
- Faulty camshaft position sensor
- Wiring short to voltage
- Corroded connector
- Damaged PCM
Diagnostic Steps
- Scan and record freeze frame data
- Inspect sensor connector and wiring
- Measure sensor signal voltage
- Test or replace camshaft position sensor
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0368?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix