P0396
PowertrainCrankshaft Camshaft Positionmoderate severityCamshaft Position Sensor B Circuit High (Bank 2)
What P0396 Means
The PCM sees an abnormally high signal from the camshaft position sensor on bank 2, sensor B. This can throw off valve timing readings and affect fuel and spark control.
Symptoms
- Check engine light on
- Rough or stalling engine
- Reduced power
Common Causes
- Faulty camshaft position sensor
- Damaged wiring or connector
- Reluctor/tone ring damage
- Bad PCM
Diagnostic Steps
- Scan and confirm code with freeze frame
- Inspect sensor wiring and connectors
- Check sensor signal with scope or meter
- Replace sensor and retest
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0396?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix