P0810
PowertrainTransmissionmoderate severityClutch Position Control Error
What P0810 Means
The transmission control module detected an error in clutch position control versus commanded position. This can cause improper clutch engagement.
Symptoms
- Slipping clutch
- Rough shifts
- Warning light on
Common Causes
- Faulty clutch actuator
- Clutch position sensor fault
- Mechanical clutch wear
- Control module or wiring fault
Diagnostic Steps
- Scan for transmission fault codes
- Monitor commanded vs actual clutch position
- Inspect clutch actuator operation
- Check clutch mechanical condition and repair
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0810?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix