P0811
PowertrainTransmissionhigh severityExcessive Clutch Slippage
What P0811 Means
The control module detected clutch slip beyond acceptable limits. This is commonly caused by a worn clutch or improper actuation.
Symptoms
- Engine revs without acceleration
- Burning smell
- Loss of power under load
Common Causes
- Worn clutch disc
- Faulty clutch actuator
- Low clutch clamping pressure
- Contaminated clutch surface
Diagnostic Steps
- Retrieve stored codes and freeze frame
- Perform clutch slip test
- Inspect clutch for wear and contamination
- Replace clutch or actuator as required
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0811?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix