P0824
PowertrainTransmissionmoderate severityGear Lever X-Position Circuit Range/Performance
What P0824 Means
The gear selector X-axis position signal is out of the expected range or not performing correctly. The module cannot reliably determine the selector position.
Symptoms
- Shifting feels inconsistent
- Transmission warning light on
- Possible failure to engage a gear
Common Causes
- Worn or misadjusted gear lever sensor
- Damaged wiring or connector
- Mechanical binding in shifter assembly
- Faulty transmission control module
Diagnostic Steps
- Retrieve codes and review freeze frame data
- Check sensor output through full lever travel
- Inspect shifter mechanics and wiring harness
- Adjust, repair, or replace sensor as required
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0824?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix