P0884
PowertrainTransmissionmoderate severityTCM Power Input Signal Intermittent
What P0884 Means
The TCM power input signal is cutting in and out intermittently. This is usually a loose connection or chafed wire.
Symptoms
- Intermittent shift faults
- Warning light comes and goes
- Momentary loss of gear selection
Common Causes
- Loose or corroded TCM connector
- Chafed or broken wire
- Poor ground connection
- Faulty transmission control module
Diagnostic Steps
- Wiggle-test TCM harness while monitoring voltage
- Inspect and clean connectors
- Check grounds for integrity
- Repair intermittent wiring faults
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0884?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix