P0917
PowertrainTransmission Shifthigh severityGear Shift Position Circuit High
What P0917 Means
The gear shift position circuit voltage is higher than expected. This usually points to an open circuit or short to voltage in the sensor wiring.
Symptoms
- Shifting failure
- Transmission fault light
- Stuck in gear
Common Causes
- Open circuit in wiring
- Short to power supply
- Faulty gear shift position sensor
- Failed transmission control module
Diagnostic Steps
- Scan for stored codes
- Inspect wiring for opens or short to voltage
- Measure sensor signal and reference voltage
- Test or replace gear shift sensor
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Community Confirmed Fixes
No confirmed fixes yet for this code. Be the first to contribute!
Submit a FixFound a Fix for P0917?
Help other technicians by sharing what worked on your vehicle.
Submit Your Fix