Maintenance Schedule 2026 Jeep Wrangler Unlimited · 2.0L I4
Normal Service Severe Service
The 2026 Jeep Wrangler Unlimited 2.0L turbo requires oil changes every 5,000 miles, with most other services falling at 10,000-mile intervals including tire rotation and filter changes, plus longer-interval fluid services at 60,000-100,000 miles.
💡 Tap any service to log completion + findings to your garage, or jump to a how-to.
⚙️ Engine
Engine oil and filter
5,000 mi / 6 mo
OLP recommends 5,000 mi even when manufacturer claims longer — extended-interval programs shorten engine life. Use 0W-20 full synthetic.
+ Log completion · How-to →
Engine air filter
20,000 mi
Inspect at 10,000 miles, replace at 20,000 or as needed in dusty conditions.
+ Log completion · How-to →
+ Log completion · How-to →
Inspect and replace as needed.
+ Log completion · How-to →
Accessory drive belt
150,000 mi
Inspect at every oil change. Replace at 150,000 miles or if cracked, frayed, or glazed.
+ Log completion · How-to →
Integral with fuel pump assembly; no scheduled replacement interval.
+ Log completion · How-to →
🔩 Drivetrain
Automatic transmission fluid and filter
120,000 mi
8-speed automatic. First change at 60,000 miles if used for severe service (towing, off-road). Normal service at 120,000 miles.
+ Log completion · How-to →
Transfer case fluid
120,000 mi
First change at 60,000 miles if severe service (towing, off-road, water fording).
+ Log completion · How-to →
Front differential fluid
120,000 mi
First change at 60,000 miles if severe service. Change immediately after water submersion.
+ Log completion · How-to →
Rear differential fluid
120,000 mi
First change at 60,000 miles if severe service. Change immediately after water submersion.
+ Log completion · How-to →
🛞 Brakes
Brake system inspection
10,000 mi / 12 mo
Inspect pads, rotors, calipers, hoses, and parking brake.
+ Log completion · How-to →
Replace every 3 years regardless of mileage. DOT 4 brake fluid.
+ Log completion · How-to →
💧 Fluids
Cooling system hoses and clamps
100,000 mi
Inspect at every service; replace at 100,000 miles or if deteriorated.
+ Log completion · How-to →
Engine coolant
150,000 mi / 120 mo
OAT (Organic Additive Technology) coolant. First change at 150,000 miles, then every 100,000 miles.
+ Log completion · How-to →
🛞 Tires
+ Log completion · How-to →
Tire pressure and condition
10,000 mi / 1 mo
Check tire pressure monthly. Inspect tread depth and wear pattern at every service.
+ Log completion · How-to →
🔍 Inspection
Multi-point inspection
10,000 mi / 12 mo
Includes suspension, steering, exhaust, battery, lights, wipers, and fluid levels.
+ Log completion · How-to →
Suspension and steering components
10,000 mi / 12 mo
Inspect ball joints, tie rod ends, control arm bushings, and shock absorbers.
+ Log completion · How-to →
Door and hood hinges, latches, and locks
20,000 mi
Lubricate hinges, latches, and locks.
+ Log completion · How-to →
Body drain holes
20,000 mi
Clear all body and door drain holes to prevent water accumulation.
+ Log completion · How-to →
⚡ Electrical
Battery test
10,000 mi / 12 mo
Test battery and charging system; clean terminals as needed.
+ Log completion · How-to →
💨 Exhaust
Exhaust system inspection
10,000 mi / 12 mo
+ Log completion · How-to →
❄️ HVAC
Cabin air filter
20,000 mi
+ Log completion · How-to →
About this schedule: AI-generated to match the manufacturer's published recommendations for this exact engine. Severe-service intervals apply if you frequently make short trips, drive in dusty conditions, tow, or deal with extreme heat or cold. Always consult your owner's manual for warranty-required services.