🚨 2010 Acura RL: Emergency Neutral
The 2010 Acura RL uses a console-mounted electronic shift lever with a shift-lock solenoid that prevents movement from Park without brake pedal input.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly engaged and wheels are chocked
- Turn the ignition to the ON (II) position if battery has any charge; this powers the shift-lock system
- Locate the shift-lock release slot: look for a small covered opening on the left side of the shifter base or near the shift gate
- Remove the small cover cap by prying gently with a flat tool
- Insert a small flathead screwdriver or key into the release slot and press down firmly
- While holding the release down, press the brake pedal (if power available) and move the shifter to Neutral
- If no power is available, continue holding the release down and physically move the shifter to Neutral without pressing the brake
- Keep the release pressed until the shifter is fully in Neutral position
Shift-lock override location
Small covered slot typically located on the left side of the shifter base assembly; check the shift gate area if not immediately visible
With zero electrical power
With a completely dead battery, the shift-lock override still functions mechanically. You will NOT be able to turn the ignition to ON, but the mechanical override release allows shifting to Neutral without any electrical power. Simply insert the tool into the release slot and hold it down while moving the shifter.