🚨 2025 Audi RS e-tron GT: Emergency Neutral
The 2025 RS e-tron GT uses a compact electronic gear selector on the center console with positions for P, R, N, and D.
✓ Expert-verified by Chris Hackleman & Jeff Moore — master technicians, 20+ years each.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a level surface and wheel chocks are in place.
- Attempt to power on the vehicle by pressing the brake pedal and pushing the start button - even with a depleted high-voltage battery, the 12V system may have enough reserve to enable drive selection.
- If the 12V battery is completely dead, you must jump-start or charge the 12V battery enough to restore minimal electrical function - the e-tron GT requires 12V power to release the electronic parking brake and enable the shifter.
- Once 12V power is available, press and hold the brake pedal firmly.
- Move the gear selector to N (Neutral) position.
- To release the electronic parking brake, pull and hold the parking brake switch while maintaining brake pedal pressure - this requires functional 12V power.
- If 12V power cannot be restored, the vehicle must be loaded onto a flatbed with all four wheels off the ground using wheel dollies or a full flatbed.
With zero electrical power
With zero 12V power, there is no mechanical shift-lock override accessible to the owner. The electronic systems, including the gear selector and electronic parking brake, are completely inoperable. You must either restore 12V power via jump-starting (jump point is under the hood on the driver's side) or load the vehicle onto a flatbed with wheel dollies. Do not attempt to tow with any wheels on the ground.
⚡ EV / hybrid warning
CRITICAL: The RS e-tron GT is a pure EV with permanent magnet synchronous motors. Never tow this vehicle with any wheels touching the ground - doing so will generate electricity back into the drive system and cause severe, expensive damage to the motor and inverter electronics. Always use a flatbed with all four wheels lifted or use wheel dollies. Even in N, the motors are mechanically connected to the wheels.