🚨 2024 Audi S3: Emergency Neutral
The 2024 S3 uses a traditional center console shifter lever with electronic shift lock linked to the brake pedal.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly engaged and wheels are chocked.
- Turn the ignition to the ON position (press start button without brake pedal, or use jump pack if battery is dead).
- Locate the shift lock override slot: it is a small rectangular opening with a cover cap located on the left side of the shifter base, near the console trim.
- Use a small flathead screwdriver or the metal key blade to pry off the cover cap.
- Insert the screwdriver or key into the override slot and press down firmly while simultaneously pulling the shifter out of Park.
- Shift to Neutral and verify the vehicle can roll freely.
Shift-lock override location
Left side of shifter base in center console, under a small rectangular cover cap
With zero electrical power
With a completely dead battery, the shift lock may still be mechanically engaged. The override slot allows mechanical bypass, but you may need to jump the 12V battery or use a jump pack to power the ignition system enough to release electronic locks. If the override does not work with zero power, a jump source is required.