🚨 2015 Chevrolet Spark: Emergency Neutral
The 2015 Spark uses a floor-mounted console shifter with electronic shift lock controlled by the brake interlock system.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly engaged and the vehicle is on level ground or properly chocked
- Turn the ignition to the ACC or ON position if battery power is available
- Locate the shift lock release cover—look for a small rectangular or square cap on the console to the left of the shifter lever (driver's side)
- Use a flat-blade screwdriver or similar tool to carefully pry off the shift lock release cover
- Insert the screwdriver or a key into the shift lock release slot and press down firmly
- While holding the release down, press the shifter button and move the shifter to Neutral
- If the vehicle must be moved without any electrical power, the mechanical override will still function—follow the same override procedure without turning on the ignition
Shift-lock override location
Small cover cap on the left side of the shifter console (driver's side); the release slot is directly beneath this cover
With zero electrical power
The mechanical shift lock override works without any electrical power. Simply remove the override cover and use the release slot while moving the shifter. No need to turn the key if the battery is completely dead.