🚨 2026 Chrysler Voyager: Emergency Neutral
The 2026 Chrysler Voyager likely continues the traditional console-mounted PRNDL shifter lever with electronic shift lock, unless a redesign has occurred.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a flat surface and set the parking brake firmly.
- Turn the ignition to the ACC or ON position if battery power is available.
- Locate the shift lock override access - it is typically a small rectangular cap/cover on the left side of the shifter base, near where the shifter meets the console.
- Use a flathead screwdriver or similar tool to carefully pry off the shift lock override cap.
- Insert a small flathead screwdriver, key, or similar tool into the revealed slot and press down firmly.
- While holding the override down, press the brake pedal (if possible) and move the shifter to Neutral.
- If you cannot get power to the vehicle at all, keep the override pressed and manually move the shifter - it should release without power.
Shift-lock override location
Typically a small rectangular cap on the left side of the shifter base, near the console mount point - verify with current model year specifications
With zero electrical power
With completely dead battery, the override slot should still function mechanically. Remove the cap, press down in the slot with a tool, and the shifter should physically release allowing movement to Neutral without any electrical power.