🚨 2020 Dodge Challenger: Emergency Neutral
The 2020 Challenger uses a traditional console-mounted PRNDL shifter lever with electronic shift lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a flat surface and parking brake is engaged
- Insert the key into the ignition and turn to the ACC or ON position (if battery has any charge)
- Locate the shift lock override slot - it is a small rectangular slot covered by a removable plastic cap, located on the left side of the shifter base near the driver's side
- Use a flat-blade screwdriver or similar tool to carefully pry off the plastic cap covering the override slot
- While pressing the brake pedal (if power available), insert the screwdriver or key into the override slot and press down firmly
- While holding down the override, move the shifter from Park to Neutral
- Remove the tool and replace the cap
Shift-lock override location
Left side of the shifter base, covered by a small rectangular plastic cap approximately 0.5 inches by 0.75 inches
With zero electrical power
With completely dead battery: Turn key to ACC position (mechanical unlock). The shift lock override is mechanical and will work without any electrical power - simply remove the cap, insert tool into the slot, press down, and shift to neutral. You do not need to press the brake pedal if there is no power.