🚨 2008 Dodge Raider: Emergency Neutral
The 2008 Dodge Raider uses a floor-mounted console shifter with electronic shift interlock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a level surface and set the parking brake firmly
- Turn the ignition key to the ACC or ON position if battery power is available
- Locate the shift lock override—look for a small rectangular or circular slot near the shifter base on the center console, likely covered by a removable plastic cap
- Use a flathead screwdriver or key to carefully remove the override cover
- While pressing the brake pedal if possible, insert a flathead screwdriver or similar tool into the override slot and apply firm downward pressure
- While holding the override mechanism down, move the shift lever from Park to Neutral
- The mechanical override should function even with no electrical power
Shift-lock override location
Small slot near shifter base on center console, typically covered by a removable plastic cap; check left side or front of shifter base
With zero electrical power
The mechanical shift lock override should function with zero electrical power. Insert tool into override slot and apply pressure while moving shifter to Neutral. The override mechanically releases the shift lock solenoid. If steering is locked, turn key to ACC position.