🚨 2005 Dodge Ram SRT-10: Emergency Neutral
The 2005 Ram SRT-10 uses a floor-mounted console lever shifter with electronic shift interlock tied to the brake pedal switch.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly engaged and wheels are chocked.
- Insert the key and turn to the RUN position (do not attempt to start).
- Firmly depress the brake pedal.
- Press the shifter release button and move the lever to Neutral.
- If the shifter remains locked due to failed brake-light switch or interlock solenoid, locate the shift interlock override access.
- Remove the small trim panel or cap on the console near the shifter base (typically to the right or front of the shifter).
- Insert a small flathead screwdriver or ignition key into the override slot.
- Press down firmly on the override while simultaneously pressing the shifter button and moving the lever to Neutral.
Shift-lock override location
Access slot is located under a small removable trim cap on the console near the shifter base; inspect the right side and front area of the shifter housing for a pry-off cap
With zero electrical power
With a completely dead battery, the steering column lock may engage and the shift interlock will be active. You must use the mechanical shift-lock override. The steering wheel may need to be wiggled while turning the key to unlock the column. Consider using a jump box to provide minimal 12V power if available.