🚨 2026 Ferrari 12Cilindri Spider: Emergency Neutral
The 2026 Ferrari 12Cilindri Spider uses steering column-mounted paddle shifters with electronic gear selection buttons or a console-mounted selector.
✓ Expert-verified by Chris Hackleman & Jeff Moore — master technicians, 20+ years each.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a flat surface and apply the parking brake
- Attempt to turn the ignition to ON position using the start button
- If the electronic gear selector is present on the console, look for a small access panel or cap near the selector base
- Remove the access panel using a small flathead screwdriver or trim tool
- Insert the screwdriver into the shift lock override slot and press down firmly
- While holding the override, press the Neutral (N) button or move the selector to Neutral
- If no power is available and override does not work, contact Ferrari roadside assistance or a Ferrari dealer for model-specific emergency procedures
Shift-lock override location
Location varies depending on gear selector configuration; typically near the console-mounted selector base if equipped, otherwise consult Ferrari service documentation
With zero electrical power
With zero 12V power, Ferrari electronic systems are completely disabled. The 12V battery is typically located in the front trunk. Jump-starting is the strongly preferred method. Ferrari's electronic architecture may require dealer-level intervention for shift lock override with no power. Do not force the transmission without proper override procedure as internal damage can occur.