🚨 2014 Fiat Siena: Emergency Neutral
The 2014 Fiat Siena uses a floor-mounted console shifter with electronic shift lock controlled by the brake pedal interlock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Engage the parking brake firmly and chock the wheels
- Turn the ignition key to ACC or ON position if battery has any charge remaining
- Locate the shift lock override slot near the base of the shifter console - look for a small rectangular or circular opening, often covered by a removable cap
- Remove the override cap using your fingers or carefully pry with a flathead screwdriver
- Insert a small flathead screwdriver, key, or similar thin tool into the override slot
- Press down firmly on the override mechanism while simultaneously pressing the shifter button and moving the shifter to Neutral
- Keep the tool inserted and the override depressed throughout the shift movement
- Once in Neutral, the vehicle can be moved or loaded onto a flatbed
Shift-lock override location
Near the shifter base on the center console, typically on the left side or front edge of the shifter assembly under a small removable cap - exact position may require inspection of the shifter perimeter
With zero electrical power
With completely dead battery, the shift lock override is mechanical and does not require electrical power. You will still need to manually release the override using the procedure above. If the steering column is locked, you may need to rock the steering wheel while turning the key, though this may be difficult with zero power.